Removing The Battery; Charging The Battery - Avery Dennison Monarch 9485 User Manual

3-3. Removing the Battery

Remove the battery door. Lift out the battery.
6

3-4. Charging the Battery

①
1. Turn off the printer.
2. Be sure that the AC plug is correct.
If AC plug is wrong, change the plug to the correct one.
3. Open the DC jack by pulling on the rubber cover and insert DC jack into
the printer.
4. Plug the AC plug into an electrical outlet.
5. The charge indicator LED (located on the AC charger as shown) shows red
or green according to the status.
3-4-1 The status of lamp in charging
Status charging charging complete
Red
Charging Lamp
NOTE
If there is trouble while charging the battery, the charge indicator LED blinks green.
Try unplugging and reconnecting charger, charging should resume.
Charging is complete when the LED changes to solid green.
②
LED
Green
7