Multi-Line Conference - NEC AK-308 User Manual

<Method 2>
To establish an Add-On
To join an Add-On Conference

Multi-Line Conference

Multi-Line Conference allows you to establish an outside call and then add another outside party to the
conversation.
- If desired, you can add five more inside parties to the conversation (for a total of six inside and two outside
parties).
- Another extension user can join (break into) the Conference using Break-In as long as the total number of
inside parties does not exceed six.
To establish a Multi-Line
To add inside parties to a
Multi-Line Conference:
Hold/Transfer/During Conversation
1. Establish outside call.
Conference:
2. Press
3. Press
and tell the Line key number. The called parties must
press the Line key to join.
4. Press
1. Lift handset.
when invited:
2. Press
1. Establish first outside call.
Conference:
2. Press
3. Establish second outside call.
4. Press
1. Establish first outside call.
2. Flash Hookswitch.
3. Dial 94 and press 2-digit line no.
4. Establish second outside call.
5. Flash Hookswitch. Conference established.
1. Press
2. Press
3. Dial extension number. Called party must lift the handset
to answer.
4. Press
more inside parties, repeat steps 1-4.
1. Establish outside call.
2. Flash Hookswitch.
3. Dial 93.
4. Dial extension number of invited inside party. Called party
must lift the handset to answer.
5. Flash Hookswitch. Conference established. To add more
inside parties, repeat steps 2-5.
DND/CONF
key.
ICM
key and call the other telephones by paging
DND/CONF
key.
LINE
key.
DND/CONF
key. Call is put on Hold.
DND/CONF
key. Conference is established.
DND/CONF
key. Conference is put on Hold.
ICM
key. Hear dial tone.
DND/CONF
key. Conference is re-established. To add
23