Intercom Hold; Intercom Call Transfer; Call Forward; Follow Me - NEC AK-308 User Manual

Intercom Hold

It is possible to place an Intercom call on hold. While on hold, music is sent to the held party. Unlike Trunk
line hold, when an Intercom call is held, no other action can be taken by the holding party. Only the hold-
originating station can re-answer this line by pressing the ICM key.
To put an Intercom call on Hold:
Note: Do not hang up while an intercom call is on Hold. If you hang up the handset, your intercom call is
terminated.
To retrieve an intercom call

Intercom Call Transfer

Intercom calls may be transferred to any extension manually.
There are two methods of transferring Intercom calls.
A. To make an Intercom Call
Transfer using Intercom
Hold an intercom call from
B. To make an Intercom Call
Transfer using Internal
Conference on page 24)

Call Forward

(See "Call Forward" page 16)

Follow Me

(See "Follow Me" page 17)

Executive DND

(See "Executive DND" page 18)
1. Press
1. Press
from Hold:
1. Intercom call between A and B.
2. Press
3. Extension C dials and extension number of A.
Hold:
4. Intercom call between B and C is established.
1. Intercom call between A and B.
2. Establish an Internal Conference with C.
3. Extension A hangs up.
Conference (See
Intercom Incoming Call
key. (see note)
HOLD
ICM
key.
key to put B on Hold.
HOLD
- If extension C is SLT, dial access code 08 or 98 then
dial extension number of A.
37