Hold/Transfer/During Conversation; Hold; System Hold; Automatic Hold - NEC AK-308 User Manual

Hold

System Hold

System Hold puts an outside call on Hold so that it can be picked up from any extension in the system. If the
System Hold Recall program is enabled, a call left on System Hold longer than a programmed period of time
re-rings the extension that placed it on Hold.
To put a call on System Hold:
To retrieve a call from System

Automatic Hold

Automatic Hold lets the KTS put an outside call on System Hold quickly without pressing the HOLD key in
order to place an internal call.
To put an outside call on
System Hold using Automatic

Exclusive Hold

Exclusive Hold puts an outside call on Hold at an extension so that it can only be picked up from that
extension. If not picked up within a programmed interval of time, a call on Exclusive Hold recall (re-rings)
the extension that placed it on Hold. On KTS, if the recall is not answered, the call reverts to System Hold
and can be picked up from any extension. On SLT, if the recall is not answered, the call reverts to extension
No.10 (or attendant extension of each tenant), or is cut-off.
To put an outside call on

Hold/Transfer/During Conversation

1. Press
2. Hang up.
- Line key flashes fast at this KTS and slowly at the other
1. Flash Hookswitch.
2. Dial 91.
3. Hang up.
1. Lift handset.
2. Press flashing
Hold:
1. Lift handset.
2. Dial 051 or 951.
1. Press
- The call in progress is automatically put on Hold.
Hold:
1. Press
Exclusive Hold:
2. Hang up.
- Line key flashes fast. At all other KTS, the Line key is
1. Flash Hookswitch.
2. Dial 92.
3. Hang up.
key.
HOLD
KTS in the system.
LINE
key.
ICM
key to place an extension call.
key twice.
HOLD
steadily lit (busy).
19