Trunk Incoming Call; Off-Hook Acces; Incoming Trunk Access; Trunk Off-Hook Signaling - NEC AK-308 User Manual

Trunk Incoming Call

Incoming Trunk Access

Trunk lines can be grouped into a maximum of 30 groups with 2 line groups assigned per extension by
system programming. The line groups assigned to each extension can access incoming calls and set the
audible assignments (day and/or night mode ringing) for the extensions.
Answering incoming calls can be as simple as pressing a Line key or dialing an access code.
To answer an outside call by
To answer an outside call by

Trunk Off-Hook Signaling

Trunk Off-Hook Signaling provides you with an audible indication of an incoming Trunk call while already
on a call: the busy extension user hears muted ringing if on a handset call or one short burst tones (0.5sec
ON/15sec OFF) if on a Handsfree call.
To answer a Trunk Off-Hook

Ringing/Recall Trunk Off-Hook Access

Ringing Trunk Off-Hook Access allows a ringing outside call to be answered by just lifting the handset; a
Line key does not have to be pressed. Recall Trunk Off-Hook Access lets a recalling (re-ringing) line be
answered by just lifting the handset.
14
1. Lift handset or press
Direct Pickup:
2. Press flashing
1. Lift handset or press
Dial Pickup:
2. Dial
1. Lift handset.
2. Dial 06 (or 96).
3. Dial 0.
1. Press
or hang up the call in progress. Intercom calls must be
Signal:
hung up since they cannot be put on hold.
2. Press the flashing
1. Lift handset.
SPK
key.
LINE
key.
SPK
key.
9 6
.
key to put an outside call in progress on hold
HOLD
LINE
key.