Temporary Memory - NEC AK-308 User Manual

Temporary Memory

When a call is abandoned while you are away, or when you fail to store Caller-ID information to Caller-ID
Table because the Table is full, caller's information will be automatically stored in the Temporary Memory
(up to 70 calls). It can hold a maximum of 10 digits long number and 15 letters long name. When there is
information in Temporary Memory, "EXISTING I.D." is shown on display. If the Temporary Memory is
full, the oldest Caller-ID information will be automatically deleted and the new information will be stored in
it's place. Temporary Memory can be used to place outgoing calls or to transfer the information to the Caller-
ID Table.
To place an outgoing call from
Temporary Memory:
THU 27 15:20PM
EXISTING I.D.
8137124
INFRONTIA S/W
To transfer information from
Temporary Memory to the Caller-
THU 27 15:20PM
EXISTING I.D.
8137124
INFRONTIA S/W
To clear all stored information in the
Temporary Memory:
THU 27 15:20PM
EXISTING I.D.
CAUTION
All Caller-ID information in Temporary Memory will be erased when the system power is turned off.
- On-hook condition
1. Press
2. Press
- The first name and number is displayed.
3. If needed, scroll by pressing
(backwards) to find desired number.
- When you reach the end of Temporary Memory, you will
see "LIST END" on the display.
4. Press
- Loop key can be used instead of Line key.
ID Table:
- On-hook condition
1. Press
2. Press
- The first name and number is displayed.
3. If needed, scroll by pressing
(backwards) to find desired number.
- When you reach the end of Temporary Memory, you will
see "LIST END" on the display.
4. Press
- The information will be stored in the next available bin.
5. Press
- On-hook condition
1. Press
2. Press
Other Features
OPAC
key.
9 5
.
#
LINE key when the number is displayed.
OPAC
key.
.
9 5
key when the number is displayed.
HOLD
CLEAR
key.
OPAC
key.
.
9 6
(forward) or
#
(forward) or
59