Hold And Transfer To Fax Machine; Outgoing Call From Fax Machine - NEC AK-308 User Manual

Other Features

Hold and Transfer to FAX Machine

In case an extension user answers to FAX call due to some reason (Miss-operation by the outside caller,
etc....), this call can be transferred to the connected FAX Machine by manual operation.
To Hold and Transfer to Fax machine:

Outgoing Call from FAX Machine

The FAX Message can be sent from the connected FAX Machine to outside FAX Machine without dialing a
trunk access code.
To Outgoing call from Fax machine:
Note: Ask your supplier for the details.
62
1. Answer an incoming call. (CNG signal may be heard.)
TRFR
2. Press .
- Confirmation tone(Short beep tone) shall be heard if
transmission is successful.
- If error tone is heard, transmission is failed due to
some reason(Fax machine is in busy status, etc.....).
3. Hang up.
1. Answer an incoming call. (CNG signal may be heard.)
2. Flash Hookswitch.
3. Dial the Extension Number of Fax Machine.
4. Hang up.
1. Go off-hook at FAX Machine.
2. Dial outside FAX Number.
3. Press START key after the outside FAX Machine
answers.