Inspire LEG PRESS OPTION Assembly & Operation Manual page 12

STEP 18
2 – 1" Hex Bolts
2 – 3/8" Flat Washers
Back Pad
Foot Plate
STEP 20
1 – 5" Hex Bolts
2 – ½" Flat Washers
1 – ½" Lock Nut
Step 17: Attach Handles to Leg Press Base using:
Step 18: Slide Back Pad Stem into Leg Press Base, Then
Attach Back Pad to Back Pad Stem using:
Step 19: Attach Seat Pad to Leg Press Base using:
Step 20: Attach Foot Plate to Press Arm using:
Handles
Seat Pad
(Wrench Tighten Bolts)
(Wrench Tighten Bolts)
(Wrench Tighten Bolts)
(Wrench Tighten Bolt)
Back Pad Stem
Leg Press Base
Page 10
STEP 17
2 – 2 ½" Hex Bolts
4 – 3/8" Flat Washers
2 – 3/8" Lock Nuts
STEP 19
2 – 2 ¼" Hex Bolts
2 – 3/8" Flat Washers
Two (2 ½" Hex Bolts)
Four (3/8" Flat Washers)
Two (3/8" Lock Nuts)
Two (1" Hex Bolts)
Two (3/8" Flat Washers)
Two (2 ¼" Hex Bolts)
Two (3/8" Flat Washers)
One (½"X 5" Hex Bolt)
Two (½" Flat Washers)
One (½" Lock Nut)