Inspire LEG PRESS OPTION Assembly & Operation Manual page 10

STEP 12
1 – 3 ½" Pulley
1 – 2" Hex Bolt
2 – 3/8" Flat Washers
1 – 3/8" Lock Nut
Step 11: Attach Pulley 4 to Attachment Arm using:
(Wrench Tighten Bolt)
Step 12: Attach Pulley 5 to Floating Pulley Bracket Assy using:
Step 13: Thread Home Gym Lower Cable around Pulleys 4 & 5 as
shown in diagram and attach to Leg Press using: One (2" Hex Bolt)
(Wrench Tighten Bolt)
Step 14: Attach Retainer Bolt to Attachment Arm using:
(Wrench Tighten Bolt)
(Make sure that the cable is routed between pulley 4 and the
cable retainer bolt.)
Pulley 5
(Wrench Tighten Bolt)
Page 8
Home Gym Lower Cable
Pulley 4
STEP 13
1 – 2" Hex Bolt
2 – 3/8" Flat Washers
1 – 3/8" Lock Nut
One (3 ½" Pulley)
One (2" Hex Bolt)
Two (3/8" Flat Washers)
One (3/8" Lock Nut)
One (3 ½" Pulley)
One (2" Hex Bolt)
Two (3/8" Flat Washers)
One (3/8" Lock Nut)
Two (3/8" Flat Washers)
One (3/8" Lock Nut)
One (2" Hex Bolt)
Two (3/8" Flat Washers)
One (3/8" Lock Nut)
STEP 11
1 – 3 ½" Pulley
1 – 2" Hex Bolts
2 – 3/8" Flat Washers
1 – 3/8" Lock Nuts
STEP 14
1 – 2" Hex Bolt
2 – 3/8" Washers
1 – 3/8" Lock Nut