Assembly Instructions (M3) - Inspire LEG PRESS OPTION Assembly & Operation Manual

Table of Contents

Advertisement

Assembly Procedure for Attaching Leg Press to M3
NOTE: The Leg Press may be attached to either side of the machine.
The picture shows only one side.
Middle Cable
Pulley 1 &
1" Barrel Spacer
Step 1: Remove the Swivel Pulley Bracket from the M3 Main Upright. Leave the cable
connected to the Swivel Pulley. Save Washers and Locknuts for later use.
Step 2: Remove Pulley 1 and 1" Long Barrel Spacer from M3 Main Upright.
Save Parts for later use.
Step 3: Disconnect the Middle Cable from the Main Upright. Re-install Bolt, Washers, and
Locknut. Wrench tighten bolt.
Swivel Pulley Bracket
M3 Main Upright
Page 11
STEP 3
Disconnect Middle Cable
STEP 2
Remove Pulley 1 & 1" Barrel Spacer
From M3 Base Frame
STEP 1
Remove the Swivel Pulley
Bracket from M3 Base Frame

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents