Configuring Advanced Presets - Honeywell ACUIX User Manual

Configuring Advanced Presets

Defining an Advanced Preset
Document 800-05662V1 Rev A
04/11
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
An advanced preset is a preset that can have multiple control and display
settings associated with it. An advanced preset can be part of a preset tour and
can be mapped to alarm and default functions. It can be defined with PTZ
coordinates or without PTZ coordinates. It can also be defined as local or global.
If the advanced preset is defined with PTZ, when recalled it goes to the PTZ
location mapped to it and enables the advanced preset parameters. If defined
without PTZ, it enables the advanced preset parameters without changing the
position of the camera.
If the advanced preset is defined as local, moving out of the preset returns the
camera to its original OSD menu settings. If it is defined as global, the settings
mapped to the advanced preset are copied to the OSD menu and remain in
effect even after the advanced preset is no longer active.
Note The dome may take up to six seconds to go to an advanced preset
depending on the number of parameters configured for that preset.
To define a preset as an advanced preset:
1. Enter preset 97 on your controller.
2. Enter the number of the preset you want to define as an advanced preset.
3. Press Focus Near to enable the advanced preset parameters (features).
4. Press Focus Far to set the advanced preset as Local or Global:
• Local: The advanced preset parameters only apply to the preset itself.
The settings remain in effect until the dome is controlled either
manually or automatically.
• Global: The advanced preset parameters are copied to the OSD menu
settings and applied globally. The settings remain in effect even after
the advanced preset is no longer active.
5. Press Iris Open.
The following message appears:
Want to configure PTZ? Y/N
6. Select Y (yes) to define (or redefine) PTZ coordinates for the preset, or
select N (no) to continue to the Advanced Preset Parameters menu without
defining PTZ settings.
57