Setting the Picture Brightness
Setting the Maximum AGC Level
Document 800-05662V1 Rev A
04/11
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
You can adjust the brightness of the image.
To set the picture brightness:
1. Select 5 Camera Options
2. Select a value between 0 and 255 where:
•
0 = darkest
•
255 = brightest
•
70 = default
Note
Setting the exposure level to a value other than 70 may upset auto
white balance (AWB) operation and auto exposure (AE) operation.
Automatic gain control (AGC) adjusts the video signal strength to compensate
for changes in light levels.
To set the maximum AGC level:
1. Select 5 Camera Options
2. Select a value between 0 and 255 where:
•
0 = picture is dim, with no noise
•
255 = picture is bright, with noise
•
216 = default
3 Video Setup
1 Exposure Level.
3 Video Setup
2 Max AGC Level 0–255.
43