Displaying The Time And Date - Honeywell ACUIX User Manual

Displaying the Time and Date

Document 800-05662V1 Rev A
04/11
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
You can show the current time and date on the screen. The time is displayed at
the lower left center of the screen, the date at the lower right center of the screen.
To show/hide the current time:
• Select 7 Enhanced Settings

ON or OFF (default).
To change the time setting:
1. Select 7 Enhanced Settings
2. Enter the new time in HH:MM:SS (hours:minutes:seconds) format using the
controller joystick.
3. Press Iris Open to accept the new time, or press Iris Close to cancel.
To change the time format:
• Select 7 Enhanced Settings

24 Hours (default) or 12 Hours.
To show/hide the current date:
• Select 7 Enhanced Settings

ON or OFF (default).
To change the date:
1. Select 7 Enhanced Settings
2. Enter the new date in YYYY-MM-DD (year-month-day) format using the
controller joystick.
3. Press Iris Open to accept the new time, or press Iris Close to cancel.

5 Time & Date Settings

5 Time & Date Settings

5 Time & Date Settings

5 Time & Date Settings

5 Time & Date Settings

1 Display Time

4 Change Time.

3 Time Format

2 Display Date

5 Change Date.
21