Select 3 Control Options; Setting Preset Auto Focus - Honeywell ACUIX User Manual

Configuring Presets, Tours, Privacy Zones, and Sectors

Setting Preset Auto Focus

Viewing a List of Presets
Deleting a Preset
56
You can turn auto focus on or off for presets.
To enable/disable preset auto focus:
•

Select 3 Control Options

Note Preset tour auto focus is turned on automatically when preset auto
focus is turned on. Preset tour auto focus cannot be turned off while
preset auto focus is on.
You can view a list of all of the presets programmed for the dome.
You can organize the list of presets by name or by type (normal or advanced).
To list presets by name:
• Select 6 Function Programming
To list presets by type:
• Select 6 Function Programming
Type.
You can delete a preset that you have programmed.
Using MAXPRO-mode/VCL/VCL UTP/Pelco P/Pelco D protocol:
1. Select 6 Function Programming
2. Locate and select the preset you want to delete. If the deletion is
successful, the message
Using Diamond/IntelliBus protocol:
• Go to the Program menu and delete the preset.

8 Preset Auto Focus

4 List PS/PT/Sectors

4 List PS/PT/Sectors

7 Delete PS/PT/MT/ Sectors.
Delete Success
appears.

ON or OFF (default).

1 Presets.

4 Preset