Parked Values In Live - ETC Element User Manual

P a r k e d V a l u e s i n L i v e
Channels and parameters may be parked and unparked from the live display. To park from the live
display, you will use the {Park} softkey. Following are some examples:
To park a channel, parameter, or group from live:
• [2] [At] [5] [0] {Park} [Enter] - parks channel 2 intensity at 50%.
• [2] {Intensity} {Park} [Enter] - parks the intensity of channel 2 at its current value.
• [2] {Park} [Enter] - parks all parameters of channel 2 at their current settings.
N o t e :
• [2] [At] {Park} [Enter] - if channel 2 is unparked, this command parks intensity at the current
value. If the intensity for channel 2 is parked, this command unparks intensity.
• [2] {Color} {Park} [Enter] - parks channel 2 color at its current value.
• [Cue] [6] {Park} [Enter] - parks all the channels stored in cue 6 at their levels provided in the
cue.
• {Park} [Enter] [Enter] - clears all parked channels and scaled park instructions (see
Parked Values in Live, page
console is currently providing, or its default value if there is no current instruction.
15
Using Park
If a channel list is constructed in which some channels are parked and some are
unparked, {Park} [Enter] will unpark them all.
184). When a channel is unparked, it reverts to the level the
Scaled
183