Recall A Macro; Stop A Macro; Delete A Macro - ETC Element User Manual

Recall a Macro

You can recall a macro from the command line, run it from the execute field of a cue, or from
another macro.
To play macro 5 from the command line press [Macro] [5] [Enter]. "Running Macro 5" displays
above the command line in live while the macro is running, if the macro is a default or foreground
macro.
To run macro 5 from cue 1 press:
• [Cue] [1] {Execute} [Macro] [5] [Enter]
To run a macro from another macro, see the example under
Editor Display, page
S t o p a M a c r o
If you need to stop a macro while running (for example, during an infinite loop) you may press
[Escape] and the macro will stop.

Delete a Macro

You can delete a macro from the macro editor display by selecting the macro and pressing [Delete]
[Enter]. You will be prompted to confirm the deletion. Confirm by pressing [Enter] again, or abort by
pressing [Clear].
For Example:
Delete macro 5 from the macro list:
•
•
Or from any display:
•
204
202.
[5] [Enter]
[Delete] [Enter] [Enter]
[Delete] [Macro] [5] [Enter]
Create a New Macro in the Macro
Element Quick Guide