ETC Element User Manual page 230

E n a b l e F D X F e e d b a c k
Clicking in the enable box will allow Element to receive FDX dimmer feedback over the network.
E n a b l e R e m o t e P o w e r O n / O f f
From Element it is possible to remotely power on and off some devices.
N o t e :
{Remote Power On} and {Remote Power Off} must be enabled on each device before it can
receive the power on and off commands. The default setting for both is Disabled.
The Remote Power commands are sent from the browser. The command for Power On is sent from
Browser>Network>Power On MultiConsole System, and the command for Power Off is from
Browser>Network>Power Off MultiConsole System.
218
Remote Power On is only available for RVIs. Remote Power Off will work for RVIs
and Client Element consoles.
Element User Manual