Live Edit Configuration Files; Edit Offline And Save Configuration Files To Microsd - ETC F-Drive W1 Series Instruction Manual

Live Edit Configuration Files

You can live edit configuration files using ETC Concert software v4.1.2 or later with the
F-Drive device package. Concert is available for free download at etcconnect.com/Concert. For
more information on Concert, see the help files within the Concert application.

Edit Offline and Save Configuration Files to MicroSD

You can edit configuration files offline in Concert with the F-Drive device package, save them
to a microSD card, and install the microSD card in the driver.
WARNING:
power to the panel before working inside could result in serious injury or
death.
AVERTISSEMENT :
panneau sans avoir déconnecté le courant peut entrainer des blessures
graves, voire mortelles.
De-energize main feed to the panel and follow appropriate Lockout/Tagout
procedures as mandated by NFPA 70E or local jurisdiction requirements. It is
important to note that electrical equipment such as breaker panels can
present an arc flash hazard if improperly serviced. This is due to the high
amounts of short-circuit current available on the electrical supply to this
equipment. Any work must comply with OSHA Safe Working Practices or
local jurisdiction requirements.
1. Verify that power is off to the W1 Driver.
2. Remove the cover of the W1 Driver to access the
microSD card slot.
3. Remove the microSD card.
4. Edit a configuration file you have saved or edit the
default F-Drive configuration file in Concert.
5. Save the configuration file with filename
rackConfig.cfg to the root of the microSD card.
• Overwrite the old configuration file on the
microSD card.
Note:
F-Drive R12 and F-Drive W1
configuration files must be named
rackConfig.cfg.
6. Insert the microSD card into the receptacle as
shown in the illustration above.
7. Replace the cover of the W1 Driver.
8. Turn on power to the W1 Driver.
Power Up and Control
RISK OF DEATH BY ELECTRIC SHOCK! Failure to disconnect all
RISQUE D'ÉLECTROCUTION! Travailler à l'intérieur du
Detail of W1 Driver
microSD Card
31