Table of Contents
Advertisement
CONVENTIONS USED IN THIS MANUAL
The model names of the disk drives covered by this manual differ depending
on their device types and capacity (*1).
Intelligent Disk Drive (IDD), "drive" or "device" in this manual.
Note: Model Name
M AU 3 147 RC
Decimal numbers are represented normally.
Hexadecimal numbers are represented as shown in the following examples:
X'17B9', 17B9h, 17B9
Binary number is represented as "010", 010b.
An X is used to represent mode parameters that are ignored by the MODE
SELECT and MODE SELECT EXTENDED commands. An X is also used
to represent mode parameters reported by the MODE SELECT and MODE
SELECT EXTENDED commands and that vary depending on conditions at
the time.
C141-C009
In addition, these disk drives are called
Interface type
Formatted capacity (1,000MB units)
* 1MB=1,000,000bytes
Disk size
3: 3.5 inch
2: 2.5 inch
Type
AU: 3.5 inch height, 15,000rpm
AT: 3.5 inch height, 10,025rpm
AV: 2.5 inch height, 10,025rpm
, or 17B9H.
H
Preface
iii
Advertisement
Table of Contents
