Product Specifications - GE D.20 RIO Hardware User Manual

Distributed i/o controller
Table of Contents

Advertisement

CHAPTER 1: BEFORE YOU START

Product specifications

System
Communications
Electrical
Power Supplies
Physical
D.20 RIO - HARDWARE USER'S MANUAL
The D.20 RIO adheres to the following system, communications, electrical, physical and
environmental specifications. Additional Standards and Protection are listed in Appendix A,
Standards & Protection.
Processor
333 MHz embedded PowerPC
Memory
256 MB of 133 MHz DDR2 RAM
8 MB NVRAM for persistent event storage
Storage
No hard drive
256 MB NAND flash soldered on board
Operating system
Linux
LED indicators
System status: Power, Ready
Ethernet port status: Link and connect speed per port
D.20 port status: Transmit and Receive status per port
Network connections
Dual redundant Ethernet interface
Twisted Pair
10/100BaseT (Isolated RJ-45 connector)
Serial communications
2 channels: D.20 Link
Data rate: 250 Kbps
Galvanic isolation: 620 VAC
Surge protected to ±2000 V peak
D.20 RIO rated input
22 to 55 VDC (±10%) 10 W + 165 W limited by a 3.5 A fuse (2.8 A at 70 °C
for auxiliary output
Minimum/Maximum DC voltage: 20 VDC / 60 VDC
Rated power supplies
580-3483
580-3484
Peak inrush current at
580-3483
70°C on cold start
580-3484
Rated frequency (AC-DC) 50/60 Hz nominal (45 to 65 Hz)
Overall height
1U [44.0 mm] 19" rack mount
54.5 mm DIN rail mount
Width
482.59 mm 19" rack mount
231 mm DIN rail mount
Depth
158 mm for chassis and rear connectors
Recommended Cable
2.0" [50.8 mm]
Clearance
Unit gross weight
1.280 kg including 19" rack mount brackets
1.145 kg including DIN rain mount bracket
Packing carton
Size: 18.1" w x 8.5" d x 7.1" h [460 mm x 216 mm x 180 mm]
Gross Weight: 20.0 lb [9.1 kg]
Battery shipping
The D.20 RIO does not contain a battery and is therefore not affected by
restrictions
US DOT or ICAO shipping restrictions.
Input 85 to 264 VAC 90 to 350 VDC
Output 24 VDC (18 to 29.5 VDC) @ 2.6 A at 70 °C
Input 85 to 264 VAC 90 to 350 VDC
Output 48 VDC (30 to 56 VDC) @ 3.75 A at 70 °C
24 VDC at 2.6 A <15 A
48 VDC at 3.75 A <20 A
GE Information
PRODUCT SPECIFICATIONS
17

Advertisement

Table of Contents
loading

Table of Contents