Table of Contents
Advertisement
REGULATORY COMPLIANCE INFORMATION
Warning symbols
Regulatory compliance information
CE Mark compliance
14
•
All AC voltage terminals are protected from accidental contact by a mechanical safety
shield.
•
All electronic components within the D.20 RIO are susceptible to damage from
electrostatic discharge. To prevent damage when handling this product use approved
static control procedures.
•
Hazardous voltages can cause shock, burns or death. To prevent exposure to
hazardous voltages, disconnect and lock out all power sources before servicing and
removing components.
•
If the D.20 RIO is used in a manner not specified in this manual, the protection
provided by the equipment may be impaired.
•
Changes or modifications made to the unit not authorized by GE Digital Energy could
void the warranty.
The following table explains the meaning of warning symbols that may appear on the D.20
RIO or in this manual.
The relevant circuit is direct current.
The relevant circuit is alternating current.
Caution: Refer to the documentation for important operation and
!
maintenance instructions. Failure to take or avoid specified actions could
result in loss of data or physical damage.
Warning: Dangerous voltage constituting risk of electric shock is present
within the unit. Failure to take or avoid specified actions could result in
physical harm to the user.
Earth/Ground Terminal
Protective Ground Terminal
Caution: Hot Surface
The D.20 RIO is rated as CISPR 11 Group 1 Class "A" equipment.
To provide higher EMC immunity and maintain CE Mark compliance, the serial cables used
for permanent RS-232 and RS-485 connections must comply with the following
requirements:
•
Cables must be shielded
•
D type connector covers must provide EMC shielding (e.g. metallized plastic or die cast
metal covers) for permanently connected RS-232 cables
Class "A" equipment is intended for use in an industrial environment. The equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with these instructions, may cause interference to other devices in the vicinity.
GE Information
CHAPTER 1: BEFORE YOU START
D.20 RIO - HARDWARE USER'S MANUAL
Advertisement
Table of Contents
