Table of Contents
Advertisement
2
Installation
This chapter describes how to install the PCI/cPCI/PM-7841. At
first, the contents in the package and unpacking information that
you should be careful are described.
2.1 Before Installing the PCI/cPCI/PM-7841
Your PCI/cPCI/PM-7841 card contains sensitive electronic compo-
nents that can be easily damaged by static electricity.
The card should be done on a grounded anti-static mat. The oper-
ator should be wearing an anti-static wristband, grounded at the
same point as the anti-static mat.
Inspect the card module carton for obvious damage. Shipping and
handling may cause damage to your module. Be sure there are no
shipping and handing damages on the module before processing.
After opening the card module carton, exact the system module
and place it only on a grounded anti-static surface component side
up.
Note:
DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN
DAMAGED.
You are now ready to install your PCI/cPCI/PM-7841.
2.2 Installing PCI-7841
What you have:
In addition to this User's Manual, the package includes the follow-
ing items:
PCI-7841 Dual Port PCI Isolated CAN Interface Card
ADLINK CD-ROM
If any of these items is missing or damaged, contact the dealer
from whom you purchased the product. Save the shipping materi-
als and carton in case you want to ship or store the product in the
future.
Installation
7
Advertisement
Table of Contents
Need help?
Do you have a question about the NuCOM PCI-7841 and is the answer not in the manual?