Configuring Ipv6 Routing Features (Cli); Configuring Global Ip Routing Settings - Dell PowerConnect 8024 User Configuration Manual

Hide thumbs Also See for PowerConnect 8024:
Table of Contents

Advertisement

Configuring IPv6 Routing Features (CLI)

This section provides information about the commands you use to configure
IPv6 routing on the switch. For more information about the commands, see
PowerConnect 8024/8024F CLI Reference Guide
the
support.dell.com/manuals.

Configuring Global IP Routing Settings

Beginning in Privileged EXEC mode, use the following commands to
configure various global IP routing settings for the switch.
Command
configure
ipv6 unicast-routing
limit
ipv6 hop-limit
ipv6 icmp error-interval
burst-interval
burst-
[
size
]
exit
show ipv6 brief
Purpose
Enter global configuration mode.
Globally enable IPv6 routing on the switch.
Set the TTL value for the router. The valid range is 0 to
255
Limit the rate at which IPv4 ICMP error messages are sent.
burst-interval
— How often the token bucket is
initialized (Range: 0–2147483647 milliseconds).
burst-size
— The maximum number of messages that
can be sent during a burst interval (Range: 1–200).
Exit to Privileged EXEC mode.
View the global IPv6 settings for the switch.
at
Configuring IPv6 Routing
1049

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect 8024f

Table of Contents