Dell PowerConnect 8024 User Configuration Manual page 1199

Command
ipv6 pim ssm {default |
group-address/prefix-length
vlan-id
interface vlan
ipv6 pim hello-interval
seconds
ipv6 pim bsr-border
ipv6 pim dr-priority
ipv6 pim join-prune-interval
interval
exit
exit
show ipv6 pim
show ipv6 pim interface vlan
vlan-id
show ipv6 pim neighbor
vlan-id
[interface vlan
show ipv6 pim rp-hash
groupaddr
show ipv6 pim bsr-router
show ipv6 pim rp mapping
Purpose
Define the Source Specific Multicast (SSM) range of
} IPv6 multicast addresses.
• default — Defines the SSM range access list to
FF3x::/32.
group-address/prefix-length
•
range.
Enter Interface Configuration mode for the specified
VLAN.
Specify the number of seconds (range: 0–65535) to
wait between sending PIM hello messages on the
interface.
Prevent bootstrap router (BSR) messages from being
sent or received through the interface.
priority
Set the priority value for which a router is elected as
the designated router (DR). The election priority
range is 0–2147483647.
Configure the interface join/prune interval for the
PIM-SM router. The interval range is 0–18000
seconds.
Exit to Global Config mode.
Exit to Privileged EXEC mode.
View system-wide PIM information.
View the PIM information for the specified interface.
View a summary or all the details of the multicast
| all]
table.
View the RP router being selected for the specified
multicast group address from the set of active RP
routers. The RP router for the group is selected by
using a hash algorithm.
View the bootstrap router (BSR) information.
View group-to-RP mappings of which the router is
aware (either configured or learned from the BSR)
Managing IPv4 and IPv6 Multicast
— defines the SSM
1199