Table of Contents
Advertisement
4.5.3.3 WIRELESS – Security – 802.1x
802.1x is a security protocol for Wireless Local Area Networks (WLAN). It is a port-based network access
control that keeps the network port disconnected until authentication is completed. 802.1x is based on
Extensible Authentication protocol (EAP). EAP messages from the authenticator to the authentication server
typically use the RADIUS (Remote Authentication Dial-In User Service) protocol. Figure below illustrates the
default setting of the 802.1x Wireless Security screen.
Server IP Address: The LAN-side RADIUS (Remote Authentication Dial-In User Service) server's
IP address.
Port: The RADUIS server's port.
Secret: Enter the Radius shared key. The secret that the AP shares with the RADIUS server. You
can enter up to 63 characters in this field.
Group Key Interval: The group key interval that is used to distribute the group key to 802.1x and
WPA stations.
Apply: Click Apply to complete the setting.
Cancel: Click Cancel to ignore all the changes.
To complete and save the setting, click Save All after clicking the Apply button.
4 Ports 11g Wireless ADSL2/2+ Router
127
Advertisement
Table of Contents
