Table of Contents
Advertisement
4.6.6 TOOLS - Modem Test
The Modem Test is used to check weather your Modem is properly connected to the WAN network. This test
may take a few seconds to complete. Before running this test, make sure you have at least one WAN
connection configured and have valid ADSL link; if the ADSL link is not connected, the test will fail. Figure
below illustrates the Modem Test screen with one WAN connections (Hinet) pre-configured.
Connection: The WAN connections you have available.
Note: You will not be able to perform a modem test without any WAN connection configured.
Type: The type of the WAN connection.
VPI/VCI: Virtual Path identifier/Virtual Channel Identifier.
Test Type: There are 4 test types:
F4 End: F4 end to end.
F4 Seg: F4 segment.
F5 End: F5 end to end.
F5 Seg: F5 segment.
4 Ports 11g Wireless ADSL2/2+ Router
145
Advertisement
Table of Contents
