Advanced - Ip Qos - Dynamix ANEXX A User Manual

4.4.4 ADVANCED - IP QoS

IP QoS: IP Quality of Service (QoS) prioritize data streams to ensure that basic connectivity is maintained
when running multiple services over one connection.
When QoS is enabled in the 4 Ports 11g Wireless ADSL2/2+ Router, the designated machine, application or
person would have precedence over peers when competing for bandwidth. The IP QoS Setup page allows
you to configure QoS for a connection, view previously configured QoS rules, add a new rule, or delete an
existing rule.
Each output device has three priority queues associated with transmit data. The high priority queues have
strict priority over the medium priority and low priority queues, and therefore can exhaust all available
bandwidth. The web UI will allow you to select the weights of the medium and low priority queues in
increments of 10% so that that the sum of the weights of the 2 queues is equal to 100%. These queues will be
serviced on a Round Robin priority basis according to the weights assigned, after the high priority queues
have been completely serviced.
Choose a connection: This field allows you choose a connection from the list of available
connections.
Priority weight : There are 2 Priority Weight to select from the drop down manual. These 2 fields
will allow you to select the weights of the Medium and Low priority queues in increments of 10%,
so that that the sum of the weights of these 2 queues is equal to 100%.
Enable IPQoS: This field allows you to enable/disable IP QoS for the chosen connection.
Note: If IP QoS is enabled and no rules are defined, a default rule is applied to the connection. The
default rule puts all the traffic to be transmitted in the Low Priority queue.
4 Ports 11g Wireless ADSL2/2+ Router 79