Table of Contents
Advertisement
4.4.12.1 Static Routing Configuration Procedure
1.
From the Choose a connection drop-down menu, select your LAN connection "LAN group 1" (For
example).
2.
Enter/leave the following parameters:
New Destination IP: 10.0.0.0 (the network IP address of the subnet)
Mask: 255.255.255.0 (the subnet mask)
Gateway: 192.168.1.5 (the LAN-side IP address of the second router, through which the stations
in the subnet access the network)
Metric: 0
You are telling the router a new subnet with an IP of 10.0.0.0 and a netmask of 255.255.255.0 has been
added and will access this 4 Ports 11g Wireless ADSL2/2+ Router via station 192.168.1.5.
The metric is 0 since the subnet is one level down the LAN.
3.
Click Apply to temporarily save the settings. You have added the subnet to the routing table (Figure
below). The fours stations in the subnet will be able to send/receive packets. You can add up to 16
entries. You can also delete any entry using the Delete checkbox.
4.
Click Apply again when you finish making all the changes.
5.
To make the change permanent, click on Save All.
4 Ports 11g Wireless ADSL2/2+ Router
107
Advertisement
Table of Contents
