Table of Contents
Advertisement
4.5.4.1 WIRELESS – Management – Access List
Access List: By default, any wireless computer that is configured with the correct wireless network name or
SSID will be allowed access to your wireless network. For increased security, you can restrict access to the
wireless network to only specific computers based on their MAC addresses.
You can create an "Allow" or "Ban" access list from the Access List screen by performing the following
procedures describe in next section.
Enable Access List: Select Allow or Ban to setup your Access List.
MAC Address: Enter the MAC Address of the wireless network that are Allow or Ban to access
your 4 Ports 11g Wireless ADSL2/2+ Router. Then click Add to include to your Access List.
Apply: Click Apply to complete the setting.
Cancel: Click Cancel to ignore all the changes.
To complete and save the setting, click Save All after clicking the Apply button.
4 Ports 11g Wireless ADSL2/2+ Router
130
Advertisement
Table of Contents
