802.1X Config - Dynamix DV-24 User Manual

4.4.11 802.1X Config

System Configuration
802.1x makes using of the physical access characteristics of IEEE802 LAN infrastructures in order to provide a
means of authenticating and authorizing devices attached to a LAN port that has point-to-point connection
characteristics, and of preventing access to that port in cases in which the authentication and authorization process
fails.
To enable 802.1x, you still to fill in the authentication server information:
Radius Server IP Address: the IP address of the authentication server.
•
Server Port: The UDP port number used by the authentication server to authenticate.
•
Accounting Port: The UDP port number used by the authentication server to retrieve accounting information.
•
Shared Key: A key shared between this switch and authentication server.
•
NAS Identifier: A string used to identify this switch.
•
Per port Configuration
In this page, you can select the specific port and configure the authorization state.
Each port can select four kinds of authorization state:
Fu: force the specific port to be unauthorized.
•
Fa: force the specific port to be authorized.
•
Au: the state of the specific port was determined by the outcome of the authentication.
•
No: the specific port didn't support 802.1x function.
•
24VDSL+2Giga Ethernet Managed 4 Band VDSL IP DSLAM USER'S MANUAL Ver. A.4
56