3.4 Checking TCP/IP Configuration
After your PC is configured and the system has rebooted, you can check the TCP/IP configuration using the
following utility provided by your Windows system:
A.
Windows 98/ME:
1.
Click on "Start" and "Run".
2.
In the open field, enter "Command", then press "OK".
3.
All the Ethernet adapter information will be shown in the appears Windows. Check if you can
get the following setting:
The IP Address as 192.168.1.x
The Subnet Mask as 255.255.255.0
The Default Gateway as 192.168.1.1
4.
Type "Exit" to end up the MS-DOS Prompt.
4 Ports 11g Wireless ADSL2/2+ Router
18