4.4.14.1 Access Control Configuration Procedure
Use the following procedure to enable Access Control and add an WAN IP address and a LAN IP address to
the access control list.
1.
Check Enable Access Control to enable the feature. This will enable the IP Access List field.
2.
You can select an IP from the IP Access List, or enter a new IP and check Add.
3.
Change the LAN and/or WAN configurations of the IP address.
4.
Click Apply to temporarily save the settings on screen.
5.
To make the change permanent, click on Save All.
4 Ports 11g Wireless ADSL2/2+ Router
113