Fuse Replacement - SSANGYONG RODIUS Owner's Manual

Ofrecido por www.electromanuales.com

FUSE REPLACEMENT

1. Turn off all electrical equipment and set the ignition switch
to "LOCK".
2. Locate the defective fuse. Refer to the fuse label in this
manual.
3. Open the fuse and relay box cover.
4. Pull out the relevant fuse by using the fuse puller.
5. Visually check whether it is blown off or not.
6. If normal, insert it to its original position.
7. If blown, check its capacity and replace it with the same
capacity.
13-20
SERVICE AND MAINTENANCE
Use only the fuse with same rating.
Normal
WARNING
The use of different types or different rating fuses could cause dam-
age to the electrical system and even start a fire.
• Always replace fuse with one with the same rating.
• Never use anything else but a fuse.
• Do not use anything metal to remove fuse.
CAUTION
If you remove the fuse when the electrical power is supplying, the elec-
trical equipment could be damaged. Replace the fuse when the ignition
key is in "LOCK" position.
NOTE
The underhood fuse and relay box has some spare fuses. Refill the
fuses immediately as you use them. The fuse rating is indicated on
the upper surface of the fuse.
Blown