SSANGYONG RODIUS Owner's Manual page 53

Ofrecido por www.electromanuales.com
Headlamp Leveling Switch*
With the low beam switched on, adjust
the aiming angle of headlamp to suit the
vehicle load.
• To lower the aiming angle, rotate the
switch downward.
• To raise the aiming angle, rotate the
switch upward.
NOTE
According to load condition, adjust the aiming angle of headlamp.
1. Without EAS: Do not turn the Headlamp Leveling Device
switch over the third stage (it may affect a visibility due to
low-aimed headlamp).
2. With EAS: Do not turn the Headlamp Leveling Device switch
over the first stage (it may affect a visibility due to low-
aimed headlamp).
AUTO Light Sensor
This senses the ambient illumination
intensity to determine the timing for
turning the headlamps and tail lamps
on or off automatically when the light
switch is set to "AUTO".
Front Fog Lamp Switch
To turn on the fog lamps, push this switch
while the tail lamps or headlamps are
turned on. Push this switch again To turn
if off.
Rear Fog Lamp Switch*
To turn on the rear fog lamp, push this
switch while the light switch is placed
in position.
Pushing this switch again will turn off the
rear fog lamps.
Rear fog lamps can dazzle people behind.
Use rear fog lamps in severe weather conditions.
CAUTION
Do not use the fog lamp as a substitute for the headlamp.
INTERIOR SWITCHES
4 - 5