Intermec EasyCoder PX4i Service Manual page 274

Appendix B — Firmware Upgrading
264
Note: A special case is if the CompactFlash card already has a Fingerprint
fi rmware. Inserting such card will always install fi rmware in the printer
according to CompactFlash card. However, perhaps you like to install a
later fi rmware version picked from the web. If so, proceed like this:
1 Insert the CompactFlash card with a upgrade fi rmware on. Switch on
and wait for a completed upgrade and the normal startup of the printer
so you are in Fingerprint mode.
2 Activate the Shell program from "/rom" like this:
LOAD "/rom/SHELLXP.PRG"
MERGE "/rom/ERRHAND.PRG"
RUN
3 In Shell, select the option "UPDATE: COMPACT FLASH?" and press
<Enter>.
4 Send the .bin or .uff fi le from the host using zmodem.
EasyCoder PX4i and PX6i Service Manual