Intermec EasyCoder PX4i Service Manual page 267

Setup Mode Overview (IPL v2.30)
SETUP:
These menus will only be displayed when an optional EasyLAN interface board is installed.
NETWORK
NETWORK: NETWORK:
IP SELECTION IP ADDRESS
IP SELECTION: IP ADDRESS:
DHCP+BOOTP 0.0.0.0
PARITY:
MANUAL
PARITY:
Read-only
DHCP
PARITY:
BOOTP
EasyCoder PX4i and PX6i Service Manual
NETWORK: NETWORK:
NETMASK DEFAULT ROUTER
NETMASK: DEFAULT ROUTER:
0.0.0.0 0.0.0.0
Read-only Read-only
Appendix A — Program Overviews
Network (option)
NETWORK: NETWORK:
NAMESERVER MAC ADDRESS
NAMESERVER: MAC ADDRESS:
0.0.0.0 nnnnnnnnnnnn
Read-only Read-only
257