Direct Inward Station Dialing - Comdial DIGITECH System Manual

he DISD feature allows an external party to call an intercom station directly without assistance by the attendant. The DISD call must be received
a
n line which has been specially programmed to allow this feature. Any line can be programmed to be a DISD line for both the normal mode of
peration and the night transfer (of ringing) mode of operation.
he number of rings which occurs on a DISD line before it is answered is programmable. By setting a large number of rings, time is allowed for a
all to be serviced in a regular manner by stations that have a line appearance for the DISD line. Setting the number of rings to 0 disables the line
umber to be dialed is programmable as is the DISD assist station that will answer calls that are not completed during this dial time limit.
a
is recommended that music source be connected to the system to provide a reassurance to the caller during a camp-on situation when the
FEATURE DESCRIPTION
Base Level: The first step in any
sequence is to enter the
When extension
number dialing is not completed within
the programmed dial time limit, a DISD
is programmed; otherwise, the line is
dropped.
lncomlng Rings:
The number of
rings which occurs on a DISD line
before it is answered is programmable.
Setting a large number of rings allows
time for a call to be serviced in a
regular manner by stations that have
line appearance for the DISD line if
such action is desired.
DIRECT INWARD STATION DIALING (DISD)
ENTRY CODE AND PROMPTING DISPLAY
Press Dial % # 7 4 6 f
1. Dial 44.
2. Press program button to select dial time limit:
1 or press Al = 6 sec.
3. Press +N for configuration mode.
1. Dial 45.
2. Press program button to choose operating mode
1 or Al
press
-OR-
- Dial 2 or press A2 = night transfer
(of ringing) mode.
3. Select rings to occur before line is answered.
(LED On = lines assigned to number of rings).
REFERENCE RECORD
9
DEFAULT 12 SEC
q
Continued
12 I 15