Comdial DIGITECH System Manual page 135

Press ITCM ++ # 7 4 6 * for base level.
!one Call Band Tables (Long Disfancx
Calls that do not match exception
ables are measured for the number of
hat have 10 digits or more (long distanct
he cost values for zone call band tables
n call rate tables 25 - 28.
Area Code Band Table (Long Distance
Calls):
Long distance calls that do not
match entries in zone call band tables an
matched against seven different area
code
band tables. Program the cost
values for area code band tables in call
rate tables 11 - 17.
1. Dial 75.
01
2. Dial to program
costing bands. "COSTING BANDS *
3. Dial 3 to program
"ZONE BANDS "
zone call bands.
4. Dial 0 if no zone is
to be as'gned.
1 - 4
Dial for zones 1 - 4.
5. Dial 200 - 999 to assign an area code.
6. Dial #.
7. Dial 268 - 999 to as'gn an office code.
9. Dial % and repeat steps 3-9 to add another area
code to same zone or to program next zone.
10. Dial t f for next SMDA feature.
Dial * 5 +k for configuration mode.
1. Dial 75.
2. Dial 61 to program
"COSTING BANDS n
costing bands.
3. Dial 2 to program
"AREA CODE BANDS"
area code bands.
4. Dial 0 if no band is
"NO
to be as'gned.
1
Dial
6. Dial 286 - 999 to as'gn area code.
5. Dial # and repeat step 8 for additional code.
8. Dial ?% and repeat steps 3-6 to program next band
7. Dial +k t for next SMDA feature.
8
Dial + t +k for configuration mode.
AREA
BAND
CODE
2
"ZONEX
3
4
I
.
I
BAND
"BAND X
OFFICE
CODE
1