Comdial DIGITECH System Manual page 107

Press ITCM ?# # 7 4 6 +k for base level.
'EATURE DESCRIPTION
Jon-Square System:
Every
buttons at each digital
mapped) to select any line assigned to
hat station or to provide other functions.
allow the system to temporarily
assigned to it. That line will appear at a
appearance there, any normal call
operations can be performed.
on page 4-50 for
on next page
.
CODE AND PROMPTING DISPLAY
ENTRY
"BUTTON MAPPING "
1. Dial 56.
01.
"BUTTON DEFAULT "
3. Select station ports to be defaulted:
3. Dial * for next button mapping feature.
Dial t f for configuration mode.
1. Dial 56. "BUTTON MAPPING '
2. Dial 02. "ASSIGN LINE n
3. Select button to be programmed:
Al - A14, Bl - B8.
Select
line ports to be assigned.
01 - 14
or Press
. -OR-
HOLD
Press then press
5. Repeat steps 3 and 4 until all '.
REFERENCE RECORD
SEE CHART ON PAGE 4- 49
Al - A14.
Al - A8.
I
Press SPKR to end.