Comdial DIGITECH System Manual page 201

FEATURE
Account
Codes (cont.)
1. Enter COS programming
2.
3 .
4 .
BENEFITS
Enter 1 for system COS programming
Enter 8 for SMDA programming
Enter 6 for account codes
To set account codes,
1
Enter
l
If the Verified Account Code Length is 3, the system will prompt you to "Enter Account
l
Codes (0 - 999)"
Type in valid account code(s), delimited by commas
l
If you enter fewer than three digits, the system will assume leading zeros
If the Veriiied Account Length is between 4 and 16, the system will respond "Table is
l
Full" (if all possible account codes are stored) or "Enter Account Code"
If the prompt "Enter Account Code" appears, type in only one valid account code
l
(the system will respond with "Command Accepted" and will allow subsequent
account code entry)
If you type in more or less than the number of digits specified as the verified
l
account code length, the system will respond with
To clear account codes,
Enter 2
l
If the Verified Account Code Length is 3, the system will prompt you to "Enter Account
l
Codes (0 - 999)
If you enter fewer than three digits, the system will assume leading zeros
If the Verified Account Length is between 4 and
l
Empty" (if there are no valid account codes in the
If the prompt "Enter Account Code" appears, type in only one valid account code
l
(the system will respond with "Command Accepted" and will allow immediate
subsequent account code entry)
If you type in more or less than the number of digits specified as the verified
l
account code length, the system will respond with
To enable optional account codes (with verification),
To enable optional account codes (without verification),
Enter4
l
To enable forced account codes (with verification),
. Enter 5
To enable forced account codes (without verification),
TAB 099
** Command Rejected ** "
l l
** Command Rejected ** II
l l