Comdial DIGITECH System Manual page 108

Pr Y ITCM % # 7 4 6 ++ for base level.
.
Blank Buttons For User Autodlal and
N O T E W h e n b l a n k i n g b u t t o n s , b e
sure a previous/y assigned
button is idle (feature not
selected by user) before it is
b l a n k e d
ENTRY CODE AND PROMPTING DISPLAY
6. Dial # to finish button mapping.
7. Select station port to be programmed:
10 - 57.
8. Dial 5 for further line/button assignment.
Dial % t for next button mapping feature.
Dial ++r # # for configuration mode.
" B U T T O N M A PPlNG "
1. Dial 56.
2. Dial 03.
3. Select button to be programmed:
Al - A14, Bl - 86.
4. Select station port to be assigned:
10 - 57.
5. Repeat steps 3 and 4 until all ports are assigned.
6. Dial #.
7. Select station ports to be programmed
with this DSSbutton assignment:
10 - 57.
8. Dial * for further DSS/button assignment.
Dial * * for next button mapping feature
.
Dial t +r t for configuration mode.
1. Dial 56.
2. Dial 04.
3. Select all buttons to be programmed:
Al - A14, Bl - 88.
4. Dial #.
5. Select station ports to be programmed with
this auto dial button assignment.:
10 - 57.
- Station 10 - 57: Dial
6. Dial + for further button blanking.
-
O R
Dial t t for next button mapping feature.
Dial t t t for configuration mode.
REFERENCE RECORD
I