Comdial DIGITECH System Manual page 123

Press ITCM +k # 7 4 6 +k for base level.
FEATURE DESCRIPTION
Connect the
industry-standard telephone to a
station port through the Analog
Terminal Interface (ATI) device.
Use this programming feature to
enable the station port for ExecuMail
operation (voice mail port). Disable the
station port as a voice mail port when
used for model 2500 telephone
operation.
NOTE: This feature is automatMy
disabled if the ATI device is
telephone at the programmed
station port.
Intercom
calls that ring at equipment connected
through an ATI device have a different
cadence than outside calls have.
Intercom ring cadence is: 1 sec. on, 0.5
sec. off, 1 sec. on, 3.5 sec. off.
Outside call ring cadence is: 2 sec. on,
4 sec. off. Disable this distinctive.
tinging feature to make the intercom
ring cadence the same as that for
outside calls.
I
ENTRY CODE AND PROMPTING DISPLAY
1. Dial 53. "STATION
2. Dial 32. "VOICE MAIL PORT "
3. Select station ports to be programmed
10 - 57
4. Dial +# next feature.
for
Dial +K + for configuration mode.
1. Dial 53. "STATION
2. Dial 33.
3. Press to toggle between enable and disable
Al
(LED On = Enable)
4. Dial to Enable.
1
(Al LED on)
Dial 2 to Disable.
5. Dial +K for next feature.
Dial +K + for configuration mode.
REFERENCE RECORD
FEATURES"
I
25 I 41
DEFAULT = NOT ENABLED
FEATURES"
I