Comdial DIGITECH System Manual page 211

TAB091
FEATURE
With software release 1 la, the DigiTech digital telephone system supports the use of the
ExecuMail voice processing system connected to the system's station ports through the Comdial
processing system
ATI-D analog terminal interface. The ATI-D is a muttipurpose
telephone system. It has dual circuits that allow the ExecuMail to interface to two station ports.
Refer to Comdial publication lMl89-037,
telephone system and the BxecuMail
identifying the ExecuMail station ports as voice mail ports, there are several other programming
considerations associated with the ExecuMail operation that the programmer can make whenever
their options are wanted.
VOICE MAIL PORT (Required)
The programmer must identify the station ports where the installer has connected the ExecuMail
system.
them as such for proper call handling.
station port for ExecuMail operation.
NOTE: The digital telephone system automatically disables this feature if an
To program this feature, press ITCM +N # 7 4 6 +I + then do the following steps:
NOTE: The station that is being used for programming cannot be
1. Dial 63.
2. Dial 32.
3. Select station ports to be programmed:
4. Press SPKR to end.
AUTOMATIC AlTENDANT (Optlon)
With the automatic attendant feature, the ExecuMail system automatically answers any line that is
ringing at a voice mail port. As a default, the system automatically enables ringing line
preference for any port the programmer identifies as voice mail ports. The programmer must
choose a ringing assignment for the lines assigned to the voice mail port before the ExecuMail
system can provide the automatic attendant feature.
To program this feature, press ITCM * # 7 4 6 *then do the following steps:
1. Dial 64.
2. Dial 1.
3. Select line ports for direct ringing:
4. Dial # when all line ports are selected.
BENEFIT
(AT/-D) for complete details for using the ATI-D to interface between the digital
Identifying them as voice mail ports enables the digital telephone system to recognize
installer replaces the AT/-D with a multiline telephone at the
programmed station port.
programmed as a voice mail port.
"STATION
"VOICE MAlL PORT *
"DIRECT RING *
-140rpressAl -A14,
Instructions For The Analog Terminal
system. In addition to the required programming task of
Use the following programming feature to enable the
FEATURES"
A
Continued on next page . . .