Comdial DIGITECH System Manual page 200

TAB 099
FEATURE
3 .
4 .
5 .
BENEFITS
STATION 10 PROGRAMMING !caSJ
To enable or disable the account code prompt for incoming calls,
. Press 1 1
. Press Al to toggle feature on and off (Al LED on = feature
-or-
. Press 1 to enable prompt for incoming, 2 to disable prompt for incoming
To set the number of account code digits to be verified,
Press 1 5
l
. Dial 3 - 16 for number of digits to be veriiied
To set emergency numbers (which will
Press 1 6
l
Dial emergency number (up to 12 digits)
l
To enter another emergency number, press
l
To clear emergency numbers,
. Press 1 7
Dial emergency number (up to 12 digits)
l
. To clear another number, press #, then dial number
Press +N +k for configuration mode
Press 5 3 for station features
Press 3 5 for OptionaVForced
To set all stations to forced account codes,
Al
Press
l
Enter station number(s), if any, of station(s) to be "Exception(s) to Forced" (i.e., they
l
will have optional account codes)
To set all stations to optional account codes,
A2
. Press
.
Enter station number(s), if any, of station(s) to be "Exception(s) to Optional" (i.e., they
will have forced account codes)
Enter +k +N for configuration mode
not require account codes for dialing),
Account Codes
System Software Enhancements
enabled
for incoming calls)