HP V1905 Series Getting Started Manual page 38

Item
Selected Ports
Viewing PoE
The Port PoE Summary Page displays the switch and port PoE settings.
Click Port  PoE. The PoE Summary Page opens.
Figure 72 Port PoE Summary Page
The Port PoE Summary Page contains the following fields:
Table 58 Port PoE Summary Page item description
Item
State
Device
Power
Power
Display
Max(watts)
Power
Used(watts)
Power
Free(watts)
State
Ports
Power
Display
Mode
Description
Displays the PoE configuration for the selected ports.
Description
Indicates the power source status. The possible field values are:

On: Indicates that the power supply unit is functioning.

Off: Indicates that the power supply unit is not functioning.

Faulty: Indicates that the power supply unit is functioning, but an error has
occurred. For example, a power overload or a short circuit.
Indicates the maximum amount of power the switch can supply. The field value is
displayed in Watts.
Indicates the actual amount of power currently used by the switch. The field value is
displayed in Watts.
Indicates the amount of additional power currently available to the switch. The field
value is displayed in Watts.
Indicates if the port is enabled to deliver power to powered devices. The possible
field values are:

Enable: Indicates the switch is delivering power. This is the default.

Disabled: Indicates the switch is not delivering power.
Indicates the port power mode. The possible field values are:

Auto: Power is automatically allocated to the port, according to port number.
Lower numbered ports are assigned a higher priority for power delivery. This is
the default.
33