Configuring Snmp Logging - HP 6125XLG Configuration Manual

Step
10. (Optional.) Convert a plaintext
key to an encrypted key.
11. Create an SNMPv3 user.
12. (Optional.) Configure the
maximum SNMP packet size
(in bytes) that the SNMP agent
can handle.

Configuring SNMP logging

Disable SNMP logging in normal cases to prevent a large amount of SNMP logs from decreasing device
performance.
The SNMP agent logs Get requests, Set requests, and Set responses, but does not log Get responses.
Get operation—The agent logs the IP address of the NMS, name of the accessed node, and node
•
OID.
Set operation—The agent logs the NMS' IP address, name of accessed node, node OID, variable
•
value, and error code and index for the Set operation.
The SNMP module sends these logs to the information center as informational messages. You can
configure the information center to output these messages to certain destinations, such as the console
Command
•
In non-FIPS mode:
snmp-agent calculate-password
plain-password mode { md5 |
sha } { local-engineid |
specified-engineid engineid }
•
In FIPS mode:
snmp-agent calculate-password
plain-password mode sha
{ local-engineid |
specified-engineid engineid }
•
In non-FIPS mode:
snmp-agent usm-user v3
user-name group-name [ remote
{ ip-address | ipv6
ipv6-address } [ vpn-instance
vpn-instance-name ] ] [ { cipher
| simple } authentication-mode
{ md5 | sha } auth-password
[ privacy-mode { aes128 |
des56 } priv-password ] ] [ acl
acl-number | acl ipv6
ipv6-acl-number ] *
•
In FIPS mode:
snmp-agent usm-user v3
user-name group-name [ remote
{ ip-address | ipv6
ipv6-address } [ vpn-instance
vpn-instance-name ] ] { cipher |
simple } authentication-mode
sha auth-password
[ privacy-mode aes128
priv-password ] [ acl acl-number
| acl ipv6 ipv6-acl-number ] *
snmp-agent packet max-size
byte-count
73
Remarks
N/A
If the cipher keyword is specified,
the arguments auth-password
and priv-password are used as
encrypted keys.
To send informs to an SNMPv3
NMS, you must configure the
remote ip-address option to
specify the IP address of the
NMS.
The default is 1500 bytes.