Configuring Vlan - HP V1905 Series Getting Started Manual

Item
Broadcast Packets
Received
Multicast Packets
Received
CRC & Align Errors
Undersize Packets
Oversize Packets
Fragments
Jabbers
Collisions
Frames of 64 Bytes
Frames of 65 to 127
Bytes
Frames of 128 to 255
Bytes
Frames of 256 to 511
Bytes
Frames of 512 to 1023
Bytes
Frames of 1024 to
1522 Bytes

Configuring VLAN

VLANs are logical subgroups with a Local Area Network (LAN) which combine user stations and network
devices into a single unit, regardless of the physical LAN segment to which they are attached. VLANs allow
network traffic to flow more efficiently within subgroups. VLANs use software to reduce the amount of time
it takes for network changes, additions, and moves to be implemented. VLANs restrict traffic within the
VLAN.
VLANs have no minimum number of ports, and can be created per unit, per device, or through any other
logical connection combination, since they are software-based and not defined by physical attributes.
Description
Displays the number of good broadcast packets received on the interface since the
switch was last refreshed. This number does not include Multicast packets.
Displays the number of good Multicast packets received on the interface since the
switch was last refreshed.
Displays the number of CRC and Align errors that have occurred on the interface
since the switch was last refreshed.
Displays the number of undersized packets (less than 64 octets) received on the
interface since the switch was last refreshed.
Displays the number of oversized packets (over 9216 octets) received on the
interface since the switch was last refreshed.
Displays the number of fragments (packets with less than 64 octets, excluding
framing bits, but including FCS octets) received on the interface since the switch was
last refreshed
Displays the total number of received packets that were longer than 9216 octets. This
number excludes frame bits, but includes FCS octets that had either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. The field range to detect jabbers
is between 20 ms and 150 ms.
Displays the number of collisions received on the interface since the switch was last
refreshed.
Displays the number of 64-byte frames received on the interface since the switch was
last refreshed.
Displays the number of 65 to 127 byte frames received on the interface since the
switch was last refreshed
Displays the number of 128 to 255 byte frames received on the interface since the
switch was last refreshed.
Displays the number of 256 to 511 byte frames received on the interface since the
switch was last refreshed.
Displays the number of 512 to 1023 byte frames received on the interface since the
switch was last refreshed.
Displays the number of 1024 to 1522 byte frames received on the interface since the
switch was last refreshed.
35