Configuring Queue Algorithm - HP V1905 Series Getting Started Manual

Table 82 CoS Setup Page item description
Item
QoS Mode
Set Default
Restore Default
Viewing CoS Settings
The CoS Summary Page displays CoS default settings assigned to ports.
Click Device  QoS  CoS. The CoS Summary Page opens.
Figure 103 CoS Summary Page
The CoS Summary Page contains the following fields:
Table 83 CoS Summary Page item description
Item
Port
Default CoS

Configuring Queue Algorithm

The Queue Setup Page contains the queue algorithm information.
Click Device  QoS  Queue. The Queue Setup Page opens.
Description
Specifies if QoS is enabled on the switch. The possible values are:

Disabled: Restores the switch factory defaults for QoS values and disables
configure QoS values on the switch.

Enabled: Enables configure QoS values on the switch.
Sets the default user priority. The possible field values are 0-7, where 0 is the lowest
and 7 is the highest priority.
Restores the switch factory defaults for CoS values.
Description
Displays the interface for which the CoS default value is defined.
Displays the default CoS value for incoming packets for which a VLAN priority tag is
not defined.
65