Configuring Acl Binding - HP V1905 Series Getting Started Manual

Item
Action

Configuring ACL Binding

This section includes the following topics:
 Defining ACL Binding
Removing ACL Binding

Viewing ACL Binding

Defining ACL Binding
The ACL Binding Setup Page allows the network administrator to bind specific ports to MAC or IP based
ACLs.
Click Device  ACL  ACL Binding  Setup. The ACL Binding Setup Page opens.
Figure 99 ACL Binding Setup Page
The ACL Binding Setup Page contains the following fields:
Table 79 ACL Binding Setup Page item description
Item
Bind ACL
Select ACL
Removing ACL Binding
The ACL Binding Remove Page allows the network administrator to remove user-defined ACLs from a
selected interface.
Click Device  ACL  ACL Binding  Remove. The ACL Binding Remove Page opens.
Description
Indicates the ACL forwarding action. In addition, the port can be shut down, a trap
can be sent to the network administrator, or packet is assigned rate limiting
restrictions for forwarding.
Description
Assigns ACL type
Selects the ACL from a list of previously defined ACLs to which the port can be bound.
62