Sata Configuration; Sata Port0~Port5; Sata Mode; Ide Mode - Supermicro X9SRW-F User Manual

Legacy USB Support
This feature enables support for legacy USB devices. Select Auto to disable
legacy support if USB devices are not present. Select Disable to have USB
devices available only for EFI applications. The options are Enabled, Disabled
and Auto.
Port 60/64 Emulation
This feature enables I/O port 60h/64h emulation support. This should be enabled
for complete USB keyboard legacy support for non-USB aware Operating Sys-
tems. The options are Enabled, and Disabled.
EHCI Hand-Off
This item is for Operating Systems that does not support Enhanced Host Con-
troller Interface (EHCI) hand-off. When enabled, EHCI ownership change will be
claimed by the EHCI driver. The settings are Enabled and Disabled.

SATA Configuration


When this submenu is selected, the AMI BIOS automatically detects the presence
of the IDE Devices and displays the following items:

SATA Port0~Port5

This item displays the information detected on the installed SATA drives on the
particular SATA port.

SATA Mode

This item selects the mode for the installed drives. The options are Disabled, IDE
Mode, AHCI Mode and RAID Mode. The following are displayed depending on
your selection:

IDE Mode

The following items are displayed when IDE Mode is selected:

Serial-ATA Controller 0~1

This feature is used to activate/deactivate the SATA controller, and sets the
compatibility mode. The options are Disabled, Enhanced and Compatible.
The default of Serial-ATA Controller 1 is Enhanced.
4-11
Chapter 4: AMI BIOS